AR Drone 2.0 RC 2.4ghz Radio Kit
This kit ONLY works with the AR DRONE 2.0. THIS WILL NOT WORK WITH THE ORIGINAL AR DRONE.
- This kit lets you use the 2.0 "Flip" function, controlled right from the radio
- Fail safe, keeps the drone from flying off
- Custom Spektrum Receiver
- Precision Control of your drone
- Step by Step Guide
- Easily removable so you can swap between regular WiFi and RC
- 6 channel 2.4Ghz RC Controller (pre-programmed)
- Tested with firmware 2.1.18
- True "Plug and Play", disconnect mod from drone and return to factory control
- USB recording automatic with take off and land switch
- You can go from an out-of-the-box range of 150 feet (WiFi), up to 150-250 meters with this radio.
- You can use Fight Recorder and some other applications to watch real-time video while using the RC controller.
- Total modification takes 10 minutes; You will need to cut a small amount of foam for the indoor and or outdoor hulls. Tape the receiver / interface to the drone, route the wire though the drone and plug it in. Last step is to tape the receiver's antenna down.
- It takes a couple of minutes to get used to it, but once you do you will never look back. If you do have an " i " device (iphone/ipod/ipad) and an AR Drone App you can connect to the drone at the same time and watch/record the video while you fly using the RC Controller. You can hand this to most kids and within a minute or two they are flying like a pro.
- Visual Low Battery Alert, the threshold is set at 15% of battery capacity. Once reached the drone will start to blink all motor LEDs red, to tell you it is time to land.
Spektrum Drone 2.0 DX8, DX7s, DX6i Receiver kit
-This kit does not come with a transmitter-
This kit ONLY works with the AR DRONE 2.0. THIS WILL NOT WORK WITH THE ORIGINAL AR DRONE.
- This kit lets you use the 2.0 "Flip" function, controlled right from the radio
- Fail safe, keeps the drone from flying off
- Custom Spektrum Receiver
- Precision Control of your drone
- Step by Step Guide
- Easily removable so you can swap between regular WiFi and RC
- Tested with firmware 2.1.18
- True "Plug and Play", disconnect mod from drone and return to factory control
- USB recording automatic with take off and land switch
- You go from an out of the box range of 150 feet (WiFi), up to the full range of the Spektrum or JR radio.
- Total modification takes 10 minutes; You will need to cut a small amount of foam for the indoor and or outdoor hulls. Tape the receiver / interface to the drone, route the wire though the drone and plug it in. Last step is to tape the receiver's antenna down.
- This kit comes with Spektrum 6-Channel Receiver (DSM2/DSMX), and includes instructions to program your radio to be used with this custom interface to have the ultimate control of your AR Drone. Programming instructions are step-by-step and easy to follow.
- It takes a couple of minutes to get used to it, but once you do you will never look back. If you do have an " i " device (iphone/ipod/ipad) and an AR Drone App you can connect to the drone at the same time and watch/record the video while you fly using the RC Controller. You can hand this to most kids and within a minute or two they are flying like a pro.
- Visual Low Battery Alert, the threshold is set at 15% of battery capacity. Once reached the drone will start to blink all motor LEDs red, to tell you it is time to land.
There will be a 15% restock fee for any returned items.

All kits are also available on eBay.
Prices are slightly less if purchased from this website.